Documentation for Auto PSIM 1.0.1.

Previous page Viewing the data about passing vehicle  Viewing the identified vehicles protocol Next page

The data about the last identified vehicle is displayed in the Last event group of the Online monitor window (left area of this window).

Note

If there is an event selected in the identified vehicles protocol or in the alarms protocol, the data about this event will be displayed in the Last event group (see Viewing the identified vehicles protocol, Viewing the alarms protocol).

To view the data about the last identified vehicle, do the following:

  1. A frame with a vehicle and a caption is displayed in the area (1).

  2. The identified license plate and license plate image are displayed in the area (2).

    Note

    • If a license plate hasn't been recognized, UNDEFINED message is displayed in the area.
    • If the characters of the recognized license plate are displayed incorrectly, it is necessary to change the font of the recognized license plate to the one that contains all characters of the corresponding country license plates (see Setting up the font of the recognized LP number).
    • Image of the recognized license plate is compressed or stretched to fit the red border.
  3. Depending on the available data, the following information can be displayed in the area (3):
    1. In the Recognizer field, the name of the license plate recognizer is displayed (the name of the corresponding LPR channel object).

    2. In the Country field, the country to which the identified license plate belongs is displayed.

      Note

      This field is not displayed when the IV module is used for recognition.

    3. In the Recognition time field, the date and time of receiving the vehicle information is displayed.

    4. In the Speed field, the vehicle speed is displayed.

      Note

      In case the AUTO-Uragan or AR-Auto modules are used for identification, and the Speed traps server module is not connected, zero speed value is displayed.

      Depending on the Vehicle Tracer settings, the speed is displayed in km/h or mi/h.

    5. In the Speed limit field, the speed limit allowed on this part of the road is displayed.

    6. In the Speeding field, the difference between the captured vehicle speed and the speed limit allowed on this part of the road is displayed.

      Note

      This field is displayed if the speeding event was registered, otherwise this field isn't displayed.

    7. In the Validity field, the accuracy level of license plate recognition in percent is displayed (the minimum acceptable value is specified in the Min. recognition quality, % field on the settings panel of the LPR channel object, see Setting up the results filtering).
    8. In the Direction field, the vehicle's direction is displayed (Undefined, To the camera, From the camera, To the right, To the left).

    9. In the Regional code field, the regional code of the vehicle is displayed.

      Note

      You can hide this field (see Setting up the Vehicle Tracer interface window).

    10. In the Camera field, the name of the camera, which captured the vehicle is displayed.

    11. In the SDK data file field, the data file about the triggered module is displayed.

      Note

      The SDK data file field is displayed only if the AR-Railway module is used.

    12. In the Address field, the camera location address is displayed.
    13. In the Identificator (№) field, the camera ID number is displayed.
    14. In the Certificate (№) field, the certificate number is displayed.

    15. In the Calibration field, the calibration expiration date is displayed.

    16. In the Vendor, Model and Color field, the vendor, model and color of the recognized vehicle are displayed.

      Note

      The Vendor, Model and Color fields are displayed only if the RR vendor and model recognizer is used.

    17. In the Type field, the type of the recognized vehicle is displayed.

      Note

      This field is displayed only if the Vehicle type recognition module and/or the RR vendor and model recognizer are used.

    18. In the Dangerous goods class and Dangerous goods composition fields, the class and the contents of the dangerous cargo are displayed correspondingly.

      Note

      The Dangerous goods class and Dangerous goods composition fields are displayed only if the AR-Auto module and the Hazard Identification Number Recognition Engine (ADR) are used.

    19. In the GPS coordinates field, the coordinates of the camera installation are displayed.

Viewing the data about the last identified vehicle is complete.

Note

In case an alarm is registered for a vehicle, the reason of alarm is also displayed in the Last event group.

The data about any event selected in the identified vehicles protocol or in the alarm protocol can be viewed in the same way (see Viewing the identified vehicles protocol, Viewing the alarms protocol).

A passing vehicle event can be created using a script (see Scripts used in the Auto PSIM software package).

  • No labels