The Settings panel of the RTSP Server object

The settings panel of the RTSP Server object is shown in figure.

The Basic settings tab

The Advanced settings tab

Table describes the parameters of the settings corresponding to the elements of the settings panel of the RTSP Server object.

№	Parameter	Method for setting the parameter value	Parameter description	Symbols used	Default value	Value range
1	ID*	Automatically	Displays the ID of the RTSP Server object in the video surveillance system	Sequence of numbers	-	Depends on the number of the RTSP Server objects in the video surveillance system
2	Name*	Type-in the value in the field	Sets the name of the RTSP Server object in the video surveillance system	Latin, Cyrillic and service characters	RTSP Server	A line containing a sequence of any symbols (letters, digits, service characters apart from > and < symbols), not case-sensitive. Number of symbols – from 1 to 60.
3	Disable	Checkbox	Sets the state (enabled or disabled) of the RTSP Server object in the video surveillance system	Boolean type	No	Yes – the RTSP Server object is disabled and is not in use. No - the RTSP Server object is enabled and is in use.
4	Computer	Selected in the list	Sets the parent Computer object to which the RTSP Server object relates	Names of the Computer objects registered in the system	Name of the parent Computer object	Depends on the number of Servers in the video surveillance system with distributed architecture
The Basic settings tab
5	Cameras	Checkbox	Specifies cameras video from which is to be transmitted to remote workstations	Boolean type	No	Yes – video stream can be viewed at remote workstation. No – video stream cannot be viewed at remote workstation
6	Port	Type-in the value in the field	Sets a port via which a video signal from the camera is transmitted. Note. This column is available only if is the Multicast* check box is set checked (10).*	Sequence of numbers	-	Any numbers of ports that are not in use. The number of ports is specified by the system administrator.
7	Gate	Select the value in the list	Specifies the Video gate through which video is received from the camera	The names of the Video gate objects registered in the system	-	Depends on the number of the Video gate objects registered in the system
8	RTSP port	Type-in the value in the field	Sets the port via which video is transmitted	Sequence of numbers	554	Any numbers of ports that are not in use. The number of ports is specified by the system administrator.
9	HTTP port	Type-in the value in the field	Sets the port which is to be in use for transmitting video via http-protocol	Sequence of numbers	8081	Any numbers of ports that are not in use. The number of ports is specified by the system administrator.
10	Multicast	Checkbox	Enables video transmission via different RTSP ports. The Multicast mode allows reducing Server load due to transmitted data reduction.	Boolean type	No	Yes – video is transmitted via several RTSP ports. No – video is transmitted via one RTSP port.
11	Receiver IP address	Type-in the value in the field	Set the address from which the broadcast in Multicast mode will be performed	IP address	224.0.1.150	From 224.0.0.0 to 239.255.255.255
The Advanced settings tab
12	VLC player compatibility mode	Checkbox	Enables sending the current time to VLC Media Player instead of the frame time.	Boolean type	No	Yes - the current time is sent to VLC Media Player. No - the frame time is sent to VLC Media Player.
The NAT Settings group
13	IP address	Type-in the value in the field	Sets the IP address of the router that performs the NAT broadcasting.	IP address	-	IP addresses range for local network
14	Port	Type-in the value in the field	Sets the port of the router that performs the NAT broadcasting.	Sequence of numbers	0	0-65535

*The name of the element is not displayed in the settings panel of the given object.

Page tree

Documentation for Intellect 4.10.4. Documentation for other versions of Intellect is available too.