VNS

The VNS object corresponds to the Voice notification service system object.

Operator format to describe actions with the sensor is:

DoReact("VNS","_id_","_command_" [,"_parametrs_"]);

List of commands and parameters for the VNS object is presented in the following table:

Command – command description	Parameters	Description
"SETUP" – settings of the voice notification service.	card<>	Name of sound device. Note. Card name is to be correspond to name which is specified in settings of sound card of the Voice notification service.
	level<>	Level of signal. Value of parameter is from 0 to 15. On default it is 8.
	channel<>	Set of sound channels. Available values of parameter: 0 – no sound channel; 1 – left playback channel; 2 – right playback channel; 3 – left and right playback channels (both channels).
	flags<>	Flags
	ip<>	IP-address of network device.
	name<>	Object name.
	pass<>	Password.
	user<>	User name.
"PLAY" – play audio file.	file<>	Full path and name of sound file. Note. If only file name is specified then path to it will be taken from registry in «HKEY_LOCAL_MACHINE\SOFTWARE\ITV\Intellect» section (HKEY_LOCAL_MACHINE \Software\Wow6432Node\ITV\Intellect for 64-bits system), in value of the «InstallPath» parameter. In this parameter it is possible to play several audio files using the «+» operation.

Command – command description	Parameters	Description
"ARM" – arm sensor.	-	-
"DISARM" – disarm sensor.	-	-
“CONFIRM” – confirm alarm.	-	-
“SETUP” – settings for sensor.	chan<>	Output number (0 – 15).
	flags<>	Flags.
	name<>	Object name.
	type<>	Type of sensor object (0 – on closing, 1 – on opening).

Properties of the VNS object are shown in the table.

Properties of the VNS object	Description of properties
ID<>	Object ID.
PARENT_ID<>	Parent object ID.

Examples of using events and reactions of the Voice notification service object:

It is required to play audio file when video camera starts record.

OnEvent("CAM",N,"REC")
{
    DoReact("VNS","1","PLAY","file<C:\Program Files\ Intellect\Wav\cam_alarm_"+N+".wav>");
}

Set less level of the volume regulator in the event of the earlier specified time zone and set the average level of the volume regulator after this time zone.

OnEvent("TIME_ZONE","1","ACTIVATE")
{
    DoReact("VNS","1","SETUP","level<2>");
}
OnEvent("TIME_ZONE","1","DEACTIVATE")
{
    DoReact("VNS","1","SETUP","level<8>");
}

Note.

The TIME_ZONE object is described as follows (see TIME_ZONE section).

Page tree

Documentation for Intellect 4.10.4. Documentation for other versions of Intellect is available too.