Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.

Previous page Configuring the comment  Configuring the checkbox Next page


Configure the radio button as follows:

  1. On the Logic tab, select the required element in the table and click the Edit button.
  2. If necessary, in the Step description field (1), enter the text that will be displayed in the column to the left opposite the element.

  3. From the Number of elements list (2), select the required number of radio buttons.

    Note

    The maximum number of elements is determined by the possible number of columns when displaying the logic (see Configuring the display of logic).

  4. In the Element name fields (3), enter the values ​​of the radio buttons.
  5. From the Number of conditions list (4), select the number of different logics used for event handling. In this case, each logic implies the value ​​that the operator selected. For each value, it is possible to set the next element to display.
  6. If it is necessary to display the same element for any selected value, then set up this element in the Logic group (5). If several logics are used, then set up each logic in the Logic [N] group (6), where N is the logic number. Do the following:
    1. In the Conditional transition field, select the element that should be displayed next.
    2. If at the same time it is necessary to execute a macro command, select it from the Macro list.
    3. Select the value of the radio button, at which the above actions will be performed.
  7. Click OK.

Example of displaying the Radio button element:

  • No labels