Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.

Previous page Configuring Sensor-Relay devices in INTELLECT™ software  Creating and configuring the Sensor system object Next page


The Relay system object is created under the Video Capture Device object.

The Relay object is created and main parameters are set in the following order:  

  1. Go to the Hardware tab in the settings panel of INTELLECT™ (1).
  2. Create the Relay system object under the Video Capture Device object or select the corresponding object in the object tree in the Hardware tab on the settings panel of INTELLECT™ (2).

  3. Specify the ID and name of the Relay object and select the Video Capture Device object to become the parent of the Relay object (3).

    Note

     If the Sensor-Relay card is used, then specify that video capture card with ADC to which the Sensor-Relay card is connected.

  4. Select the Channel number matching the number of output connector to which the relay is connected (4).

  5. In the Executor dropdown list select the type of executive device used as the relay in the guarded area (5).
    The Executor parameter is used for selecting the icon on the interactive map. This parameter is essential for better perception of information (displayed on the map as object icons) by Operator and for real-time intercepting by Operator if required.
    The types of executive devices available for the Relay system object are given in table.

    Executive 

    device

    Description

    Light

    Icon of the interactive map for the device responding 

    to changes in the illumination in the guarded area

    Signal

    Icon of the interactive map for the device 

    responding to sound changes in the guarded area

    Lock

    Icon of the interactive map for the device 

    responding to locking/unlocking a window, door, etc.

  6. Click the Apply button to save the changes.

 

Creating and configuring the Relay system object is completed.