Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.

Previous page Configuring the Intellect's SIP server  Configuring SIP-devices of the Intellect's SIP server Next page


The network settings of the Intellect SIP server are set in the following order:

  1. Go to the settings panel of the SIP-terminal object.
  2. Set the Terminal type switch to the SIP server position (1)  — the SIP-terminal acts as a server, any SIP-clients can be connected to it (both Intellect-based and the third-party SIP-devices).
  3. From the Network drop-down list (2), select the IP address of the network adapter that will be used to connect to the network where the SIP-clients are located.
  4. In the SIP port field (3), specify the port number which will receive the data from the SIP-clients.
  5. From the SIP transport drop-down list (4), select the transport level protocol to be used: TCP or UDP.
  6. If necessary, specify the RTP ports range in the corresponding text fields (5).
  7. Click Apply (6).

The network settings of the Intellect's SIP server are set.

  • No labels