Operator settings of the SIP-panel interface object

On the Operator settings tab, you can specify a default operator and a list of operators who can work with this SIP-panel.

To configure the operator settings of the SIP-panel, do the following:

1. Go to the Operator settings tab of the SIP-panel object.
   

2. In the Operators table (1), select the required SIP-operators who can work with this SIP-panel:

   Note

   To add new lines to the table, use the "Down" key on the keyboard. To delete a line, use the Ctrl+Del key combination.

   1. To add all SIP-operators, click the All button (2).

   2. To add several SIP-operators, click the Range button (3). As a result, the Add operators window opens.
      

      1. Select the required SIP-operators from the left list (1) and use the buttons (2) to move them to the right list (3).

      2. Click the Apply changes and close button (4).

3. From the Default drop-down list (4), select the default SIP-operator:

   1. Select on start—when you first start the SIP-panel, you must select the appropriate SIP-operator in the authorization window. Next time, you will log in under the previously selected SIP-operator.

   2. User rights—you will log in to the SIP-panel under the SIP-operator that is linked to the Axxon PSIM user rights. Also, you must register in Axxon PSIM with the rights of the corresponding user.

   3. SIP-operator—you will log in to the SIP-panel under the selected SIP-operator.

      Note

      You can select the SIP-operator from the list if the display is enabled for only one computer of the video surveillance system (see Assigning the displays to the operator workstations).

4. Click the Apply button (5).

Configuring the operator settings of the SIP-panel is complete.