Documentation for ACFA PSIM 1.3.

Previous page List of Terms used in the ApolloSDK Integration Module Settings Guide  Supported hardware and licensing of the ApolloSDK integration module Next page

On the page:

Purpose of the document

This ApolloSDK Integration Module Settings Guide is a reference manual designed for ApolloSDK integration module configuration technicians and operators. This module functions as part of ACFA PSIM.

This Guide presents the following materials:

  1. General information about the ApolloSDK integration module.
  2. Configuration of the ApolloSDK integration module.
  3. Working with the ApolloSDK integration module.

General information about the ApolloSDK integration module

The ApolloSDK integration module is part of ACFA PSIM. It is designed to configure and control ApolloSDK hardware.

The ApolloSDK integration module allows working with ApolloSDK system built using AAN central controllers and without them.

The following hardware is integrated with ACFA PSIM:

  1. AAN central controllers (an ACS component).
  2. AIM interface modules (an ACS component).
  3. AIO alarm panels (an SFA component).

Note

It is possible to work with AIO alarm panels only using the AAN central controller.

AAN central controllers are connected via COM-port or Ethernet-connection.

Connection via COM-port can be established in case of using one interface module without AAN central controller. Ethernet-connection with converter is used in case of several AIM interface modules.

Note

 Detailed information about the ApolloSDK system can be found in the official documentation (manufacturer AAM Systems).

Attention!

The ApolloSDK integration module requires ApolloSDK system software installed on the Server. ACFA PSIM supports Apollo SDK v.4.1.1 with the ability to work via RDP.

Before configuring the ApolloSDK integration module, the following actions must be performed:

  1. Install the required hardware on the site.
  2. Install the ApolloSDK software on the Server (is located in the <Directory of the Axxon PSIM software installation>\Modules\ApolloSDK).
  3. Copy the license.bin file (<Directory of the Axxon PSIM software installation>\Modules\ApolloSDK\ApolloSDK v.4.1.1 (14.09.2023) Installer\License) to directory of the ApolloSDK software installation.
  • No labels