Documentation for ACFA PSIM 1.3.

Previous page Configuring the system without AAN central controller  Configuring the AIM SC controller Next page

The AIM SC controller connection is configured on the settings panel of the Driver of minor line object. This object is created on the basis of the Apollo SDK object.

To connect the AIM SC controller, do the following:

  1. From the Type of driver drop-down list (1), select the controller connection interface: RS-232 or Ethernet.
  2. If the controller is connected via a COM port:
    1. From the Port drop-down list (2), select the number of the port to which the controller is connected.
    2. From the Baudrate drop-down list (3), select the baudrate.
    3. Click the Apply button (4).
  3. If the controller is connected via Ethernet:
    1. In the IP field (1), specify the controller's IP address.
    2. In the Port field (2), specify the controller port number.
    3. Click the Apply button (3).
  • No labels