Connecting Axis to ACFA PSIM

Axis connection to ACFA PSIM software package is configured as follows:

1. Go to the settings panel of the Security equipment object, which is created on the basis of the Computer object on the Hardware tab of the System Settings dialog box.
2. On the settings panel of the Security equipment object, click the Change device configuration button (1).
3. From the Vendor name drop-down list, select Axis (2).

   

   Note

   The Model name and Firmware version parameters will be filled automatically.

4. Click OK (3).
5. In the address field (4), enter the IP address of the Axis device.
   
6. Set the True value for the blockingconfiguration parameter (5), if it is required that any changes made in the ACFA PSIM are automatically written to the device. Otherwise, set the False value, and the changes will not be written to the device.
7. In the login (6) and password (7) fields, enter the login and password to connect to the Axis device. The default login and password is root.
8. In the port field (8) enter port 80.

9. Click Apply (10).

   Note

   In the area (9), the information corresponding to the current configuration of the Security equipment object is indicated.

Axis connection to ACFA PSIM software package is completed.