Documentation for ACFA PSIM 1.3.

Previous page Wireless lock creation  Configuration of SALTO ACS in ACFA PSIM software package Next page

Wireless locks are initialized through the following steps:

  1. Connect PPD to USB-port.
  2. Click Connect PPD.The PPD connection window opens.

  3. Set the Initialize locks checkbox in the PPD connection window (1).

    Note.

     If the Initialize locks checkbox is not set, then the INITIALIZE LOCKS object is not available in the PPD menu.

  4. Select the connected wireless locks (2).

    Note.

    It is not essential to initialize all doors simultaneously but it’s not recommended to postpone the door initialization.
  5. Click Download (3). Wait while the data transfer to PPD will be completed.
  6. Disconnect the PPD from the USB-port.
  7. Turn on PPD and go to the device main menu.  
  8. In the PPD menu select INITIALIZE LOCKS.
  9. In the PPD menu select the name of the initialized lock.
  10. Connect the PPD to wireless lock.
  11. Wait for the sound signal. It means that the lock receives information from PPD and gives its identifier to PPD.
  12. Disconnect the PPD from the wireless lock.
  13. Repeat steps 8-12 for all locks to be initialized.
  14. Connect the PPD to the USB-port.
  15. Click Connect PPD. Information about locks is sent to the software. Locks are connected to the gate.

Wireless locks initialization is completed.