Go to documentation repository
Previous page Next page
Associating AAN, AIO or AIM Service Input with terms allows changing internal variable's term value at certain events.
The configuration steps below are shown for Apollo AAN Service Input. Associating AIO or AIM service inputs with terms is performed in the same way (with one exception, see the bottom of the section).
- Go to Apollo AAN Service Input object settings panel.
Select an object corresponding to the event from the Type of input drop-down list (1, see table below).
Object Description Host connection Initiates an internal variable if the AAN controller's status of communication with the computer changes Power failure Initiates an internal variable on power failure Tamper Initiates an internal variable on housing intrusion - Select the set of icons for input on the Map from the Set of icons drop-down list (2).
- In the Internal variable drop-down list select the required Apollo Internal Variable object (3).
- In the IV Term drop-down list select the Apollo Term object corresponding to a term to be controlled by the state of this Apollo AAN Service Input object (4).
From the drop-down lists in the Operation with term, if input group select which values the term should have if the AIM input is not configured, armed, in a fault state or in an alarm (5). The following operations are available:
Operation
Description
No operation
The value of the corresponding term does not change
Clear term
The term is set to FALSE
Set term
The term is set to TRUE
Send impulse
The value of the term changes to the opposite for a short preset period
- Click Apply (4).
To save the changes to the controller, write configuration to hardware.
Associating Apollo AAN Service Input with term is completed.
Associating AIO (Apollo AIO Service Input object) or AIM (Apollo AIM Service Input object) service inputs with terms is performed in the same way with one exception: in the Type of input drop-down list, the following values are available:
Object | Description |
---|---|
Connection status | Initiates an internal variable if the AAN controller's status of communication with the AIO or AIM panel changes |
Tamper | Initiates an internal variable on housing intrusion |
Power failure | Initiates an internal variable on power failure |