Configuring inputs, outputs and relays of BioSmart UniPass controller

The inputs, outputs and relays of the BioSmart UniPass controller are represented by the Biosmart Input, Biosmart Output and Biosmart Relay objects, respectively. These objects can be created in the following ways:

• automatically from the settings of the head Biosmart Palm Vein object (see Creating and configuring the Biosmart Palm Vein head object);
• manually based on the head object Biosmart UniPass.

Configuring BioSmart UniPass controller input

The BioSmart UniPass controller input is configured as follows:

1. Go to the Biosmart Input object settings panel.
   
2. From the Number (1) drop-down list select the input number from 1 to 6.
3. Click Apply (2).

Configuring the BioSmart UniPass controller input is completed.

Configuring BioSmart UniPass controller output

The BioSmart UniPass controller output is configured as follows:

1. Go to the Biosmart Output object settings panel.
   
2. From the Number (1) drop-down list select the output number from 1 to 6.
3. Click Apply (2).

Configuring BioSmart UniPass controller output is completed.

Configuring BioSmart UniPass controller relay

The BioSmart UniPass controller relay is configured as follows:

1. Go to the Biosmart Relay object settings panel.
   
2. From the Number (1) drop-down list select the relay number from 1 to 2.
3. Click Apply (2).

Configuring BioSmart UniPass controller relay is completed.