Previous page Next page


List of user access cards is displayed in the User card table of the Editing. <Full name> (ID) window.

The object code is specified in brackets, then the card code follows. The access cards format is set in the Access Manager object settings (see Configuring access cards).

Several access cards can be assigned to one user.

Attention!

Assigning multiple access cards to a user should be supported by hardware and by the corresponding integration module. If used hardware/integration module supports only one card, and multiple cards are assigned to a used, then all cards excepting the first card will be ignored by system.

Support for multiple user access cards has been tested in the following integration modules: Noder, ApolloSDK v.2, SDK Orion v.2, PERCo-S-20, PERCo-S-20 v.2, AccessNet (ABC), Forteza, ParsecNet 3. For information on others integration modules, please contact the AxxonSoft technical support.

Input of card number and code while assigning access cards to a user can be performed in one of the following ways:

  1. Manually.
  2. Using the control reader.

Note

 List of control readers used for user access cards input is specified while system configuring — see Configuring control readers in the Access Manager.

  • No labels