Previous page Suprema Integration Module Settings Guide  Supported hardware and licensing of the Suprema integration module Next page


On the page:
 

Purpose of the document

This Suprema Module Settings Guide is a reference manual designed for Suprema Module configuration technicians. This module is part of an access control system (ACS) built on the ACFA Intellect Software System.

This Guide presents the following materials:

  1. general information about the Suprema Biometrical ACS module;
  2. configuration of the Suprema Biometrical ACS module;
  3. working with the Suprema Biometrical ACS module.

General information about the Suprema integration module

The Suprema Module is a component of an ACS built on the ACFA Intellect Software System. It was designed to perform the following functions:

  1. Configuration of the Suprema Biometrical ACS (manufactured by Suprema Inc.);
  2. Interaction between the Suprema Biometrical ACS and the ACFA Intellect Software System (monitoring, control).

Note:

Detailed information about the Suprema Biometrical ACS is presented in the official documentation for that system.

Before configuring the Suprema Module, the following actions must be performed:

  1. Install the Suprema Biometrical ACS hardware on the protected territory (see the Suprema reference documentation).
  2. Connect the Supreme ACS hardware to the Server.
  3. Install BioStar 1_8 onto the Server (available on the official website of the manufacturer of Supreme ACS).
  4. Configure the connection of Supreme ACS to the BioStar 1_8 Server (see the reference documentation for the configuration utility of the BioStar 1_8).