Previous page Next page


Before you configure the Teltonika module in ACFA Intellect, do the following:

  1. Install a compatible Teltonika Configurator depending on the trackers used.
  2. Connect to the tracker and check its status. The tracker will start transmitting data only after establishing its position using GPS/GLONASS satellites.
  3. On the GPRS tab, explicitly specify the server IP address and the server port for receiving data. This IP address should be static (public). It is also necessary to indicate the type of protocol used.
  4. Configure other settings according to the official documentation for the tracker.

The preliminary configuration of the Teltonika geotracking system is complete.

  • No labels