Documentation for ATM Intellect 12.0. Documentation for other versions of ATM Intellect is available too.

Previous page ATM Intellect Workstation configuration  Setting the ATM-Intellect Workstation connection parameters Next page

Note

ATM-Intellect components (ATM-Intellect Pro, ATM-Intellect Workstation and ATM-Intellect Workstation TC) can work in a distributed configuration, while all the listed objects see where each of them is installed and can be configured.

To create necessary ATM-Intellect Workstation objects, do the following:

  1. Go to the Hardware tab of the System settings dialog box.
  2. Create the IIDK Interface object (1). Set the identifier of the IIDK Interface object (2).
  3. Create the ATM-Intellect Workstation object on the basis of the Computer object (1). On the settings panel of this object, in the IIDK interface field (2), enter the identifier of the previously created IIDK Interface object.

  4. Create the required number of child Surveillance Object objects (1) on the basis of the ATM-Intellect Workstation object. When you create these objects, specify the same ID (2) as in the ID field on the settings panel of the corresponding Surveillance object object created on the basis of the ATM-Intellect Pro object.

    Note

    It is not necessary to manually create the Surveillance Object objects based on the ATM-Intellect Workstation object. They will be created automatically upon successful configuration of the communication between the ATM-Intellect Pro and the ATM-Intellect Workstation with the name and identifier specified on the ATM-Intellect Pro side (see Setting up a connection between ATM Intellect Pro and ATM Intellect Workstation).

Objects creation is completed.