Setting up the audio notification when registering the alarm events

It is possible to set up the audio notification when registering the following alarm events:

1. Vehicle overspeeding;
2. Identifying the recognized plate in the External Plates DB.

Setting up the audio notification when registering the alarm events is done in the following way:

1. Go to the Vehicle Tracer settings panel.
   
2. Click the Settings button.
3. Go to the Audio notification tab in the opened dialog window (1).
   

4. Select the required alarm event or external database from the (2) field and click the button to the right of it. In the opened standard Open dialog window, select the required sound file and then click the Open button. As a result, the full path to the sound file will be displayed in the field corresponding to the selected alarm event or external database.

   Note

   The number and the names of the external databases displayed on the Audio notification tab correspond to those external databases that were pre-selected for analyzing the identified plates (see Selecting the External Plates Database).

5. Repeat step 4 for all required alarm events or external databases.

6. Click the OK button to save the changes and close the Settings dialog window (3).

   Note

   Click the Cancel button to close the Settings dialog window without any changes (4).

7. Click the Apply button to save the changes on the Vehicle Tracer settings panel.

Setting up the audio notification when registering the alarm events is completed.