Documentation for Face Intellect 7.4. Documentation for other versions of Intellect is available too.

Previous page HUAWEI module licensing  Configuring the HUAWEI face recognition module Next page

The camera technical specifications which are necessary for the correct operation of the HUAWEI recognition module are listed in the table below:

Camera specifications
  • Color camera with resolution: 2 million pixels (1080p), minimum: 720p.
  • CCD / CMOS: 1/1.8 or higher.
  • H.264 and RTSP support.
  • The maximum encoding speed should be at least 4 Mbps.
  • Guaranteed image quality in low light conditions.
  • The frame rate should be not less than 12 fps, and not less than 6 fps for face recognition at turnstiles.
Video image
  • The sharpness of the captured faces on the received photos should be not less than 64 grayscale. Deficient or exceeding illumination is not allowed.
  • There should be no back light and sharp gradients of light and shade.
  • The faces should be evenly illuminated with a diffused light of at least 100 lux. Directional side lighting is not allowed.
  • The photos of the captured faces received from video cameras should be clear. Image blurring caused by motion is not allowed.
  • The maximum deviation of the face in the camera FoV from the face-forward position should not exceed 5 degrees.
  • The distance between pupils on the received photos of the captured face should be not less than 60 pixels.
  • There should be minimum mutual overshadowing of the captured faces.
  • The size of the front face image should be at least 70*70 pixels; 120*120 pixels size is recommended, but it should not exceed 300*300 pixels.
Camera positioning
  • It is necessary to install the camera in such way so that people move directly to the camera.
  • The required distance between the camera and the face can be set using a lens with required focal length.
  • No labels