Documentation for Axxon Next 4.6.0. Documentation for other versions of Axxon Next is available too.

Previous page Configuring connection of single-channel devices  Connecting cameras via the GB/T28181 protocol Next page

To connect multi-channel devices (e.g. DVRs) over RTSP, do as follows:

  1. Go to IP Device Discovery Wizard and open the manual addition field (see Adding and removing IP devices).

  2. In IP address, enter the device address (1).

    Attention!

    Following  the IP address, add the";" symbol. Otherwise some channels may fail.

  3. Select RTSP in the Vendor field (2).

  4. In Model, select the model name, that shows the corresponding number of device channels (3). For example, for a four-channel device, select 4_channel_device.
  5. Enter the username (4) and password (5).
  6. Click .

A parent  IP server object will be created hosting a number of video cameras objects equal to the number of channels on the device.

To configure channels, do as follows:

  1. Select a child Camera object.
  2. In RTSP Stream URI enter the streaming address.
  3. Repeat the steps for all channels.
  • No labels