Documentation for Axxon One 2.0. Documentation for other versions of Axxon One is available too.

Previous page Configuring connection of single-channel devices  Generic Drivers (General device, generic) Next page

To connect multi-channel devices (e.g. DVRs) over RTSP, do as follows:

  1. Go to IP Device Discovery Wizard and open the manual addition field (see Searching, adding, configuring and removing IP devices).

  2. In the IP address field, enter the device address (1).

    Attention!

    Following the IP address, add the";" character. Otherwise, some channels can fail.

  3. Select RTSP in the Vendor field (2).

  4. In the Model field, select the model name that shows the corresponding number of device channels (3). For example, for a four-channel device, select 4_channel_device.
  5. Enter the username (4) and password (5).
  6. Click .

A parent IP server object will be created hosting a number of video cameras objects equal to the number of channels on the device.

To configure channels, do as follows:

  1. Select a child Camera object.
  2. In RTSP Stream URI, enter the streaming address.
  3. Repeat the steps for all channels.
  • No labels