Documentation for POS PSIM 1.0.1.

Previous page General information about the tcpgen.exe utility  Equipment/Hardware integrated into the POS PSIM software Next page

Working with the tcpgen.exe utility is performed as follows:

  1. Run the tcpgen.exe utility.
  2. From the Protocol drop-down list select the connection protocol on which data will send to the POS PSIM (1). TCP/IP, UDP and RS232 protocols are available.
  3. Configure connection parameters if default parameters are not valid (2). IP-address and port of connection to the POS PSIM are specified when using the TCP/IP and UDP protocols, number and speed of port are specified when using the RS232 protocol.
  4. Click the Open button and select a text file with pos-terminal log using the Windows standard dialog of files opening (3).
  5. To stop data sending to the POS PSIM when log file will end, set the Stop send if end of file checkbox (4). To send data cyclically, keep the checkbox deselected.
  6. Specify the required delay between packages in milliseconds in the Delay field (5).
  7. Specify the package length in bytes in the Length field 96).
  8. Click the Connect button (7).
  9. Process of sending will display in the status field (8). If data sending is impossible, description of problem will be specified in the field.

Note.

To stop data sending click the Disconnect button.

Working with the tcpge.exe is completed.

  • No labels