To configure the BACnet Device object of the BACnet Server integration module, do the following:

  1. Go to the settings panel of the BACnet Device object that is created on the basis of the BACnet Server object (see Configuring the object of the BACnet Server integration module).

  2. In the Read property interval (ms) field, specify the time interval in milliseconds for polling the BACnet server. This setting is valid only if you select the Read property (not recommended) value in the Subscribe type field.
  3. In the Subscribe type field, select the mode of displaying the events of parameter change:
    1. Without subscribe—events of parameter change aren't displayed.
    2. Normal—all events of parameter change are displayed.
    3. Read property (not recommended)—events of parameter change are displayed for the time interval specified in the Read property interval (ms) field.
  4. Click the Apply button to save the settings.

Configuration of the BACnet Device object of the BACnet Server integration module is complete.

  • No labels