The Settings panel of the Intellect section

The Intellect section is used for Intellect advanced setup. The settings panel for the Intellect section is shown in the figure.

The parameters of the Intellect settings panel are described in the table.

No	Parameter name	Method of setting the parameter value	Description	Representation	Default value	Value range
1	The Core IP address field with button. Set on the Client	Enter the value in the field/use the button	Sets the IP address of the Intellect server to which the slave.exe module is connected by default. In case of pressing button, IP address of the local computer is set	IP address	127.0.0.1	Depends on net settings of the Server. In case of connection failure dialog window requiring IP address is displayed
2	Keyboard prefix	Enter the value in the field	Sets the prefix for a special key-board. When a button is pressed on this key-board the Intellect detects when the button was pressed on this very key-board	Symbol	—	Usually, a tilde (~), code 126
The Logging subsystem group
3	Debug mode	Select the value from the drop-down list	Sets the mode of the Intellect Debug window displaying	List of available modes of Debug window displaying	None	Disabled—Debug window is not displayed. Debug 1—Debug window is displayed and a log-file containing recordings about modules errors is created. Debug 2—Debug window is displayed and a log-file containing recordings about modules errors and alerts is created. Debug 3—Debug window is displayed and a log-file containing recordings about all the modules events is created. Debug 4—Debug window is displayed and a log-file containing recordings about all the modules events, and also additional menu that is individual for each module (used by programmers) are created
4	Log-storing time (hours)	Enter the value in the field	Sets the time of keeping log files	Sequence	48 hours	> 0
5	Counters logging time (sec)	Enter the value in the field	Assigns the time interval in seconds for logging processor load, memory usage, and disk usage	Sequence	60	Positive whole numbers not less than 60 and zero. If the value 0 is specified, sensor data is not included in the log file
6	Save logs	Set the checkbox	Enables logs saving	Boolean type	Yes	Yes—logs are saved. No—logs are not saved
7	Redirect to debugger	Set the checkbox	Enables the debugger	Boolean type	None	Yes—the debugger is in use. No—the debugger is not in use
8	Maximum size (MB)	Enter the value in the field	Defines the maximum size of RAM that log files can use. Log files are archived after that size is reached	Sequence	100 MB	>= 100 Values less than 100 Mb are ignored
The JPG and AVI files export path group
9	Default (Intellect\Export)/Other	Set in the position	Sets the folder for exported frames from the Intellect video archive (see Frame export)	—	Default (Intellect\Export)	Default (Intellect\Export)—exported to the C:\Users\%current user name%\Documents\Intellect\export\ folder Other—exported to the selected folder
10	Other with the button	Click the button/enter the value in the field	Sets the path name to the folder, where frames from video archive are to be exported when the switch is set in the Other position. Note. The specified path will be applied to the ExportDir registry key located in HKLM\SOFTWARE\WOW6432Node\AxxonSoft\Intellect\Video (see Registry keys reference guide)	Path name	—	—
11	Open folder	Click the button	Opens the current folder for frame export	—	—	—
12	Record path	Set the checkbox	The checkbox allows you to prohibit changing the export directory when exporting an archive period Note The selected value is written to the ExportDirFixed registry key located in HKLM\SOFTWARE\WOW6432Node\AxxonSoft\Intellect\Video (see Registry keys reference guide).	Boolean type	No	Yes—export catalogue change is forbidden. No—export catalogue change is allowed
No group
13	Receive uncompressed video	Set the checkbox	Enables receiving uncompressed video from the Server. As a rule is set on the Client	Boolean type	No	Yes—Client receives uncompressed video from the Server No—Client receives compressed video from the Server
14	Event viewer over all windows	Set the checkbox	Enable displaying the Event viewer window over all windows	Boolean type	No	Yes—the Event viewer window is displayed over all windows. No—the Event viewer window is displayed if a corresponding screen is selected
15	Only local protocol	Set the checkbox	Enables logging the events registered in the given computer to the Events protocol database. Note. This parameter can be set on the settings panel of the Computer object – see Configuring events logging section	Boolean type	No	Yes—events registered in the given computer are recorded to the Events protocol database No—all required events are recorded to the Events protocol database
16	Sort tree objects by ID	Set the checkbox	Enables sorting of objects in the tree by identifier. Note 1. If sorting by name is chosen, and there are numbers in the object name, then the objects will be sorted in alphabetical order. For example, an object with the name "115" will be above the object with the name "15", because in the name "115" the second number is 1, and in the name "15" the second number is 5. Note 2. This key also affects the sorting of objects in the tree when adding the objects to a layer in the Map Editor utility	Boolean type	No	Yes—objects in the tree are sorted by identifier No—objects in the tree are sorted by name
17	Disable protocol	Set the checkbox	Disables events logging to the Event viewer database on this computer. Note. This parameter can be set on the settings panel of the Computer object – see Configuring events logging section	Boolean type	No	Yes—events are not logged to the Event viewer database No—events are logged to the Event viewer database
18	Used memory dump	Set the checkbox	Enables logging .dmp file with a copy of main memory with incorrect shutting down at least one of the system modules to the Intellect root folder	Boolean type	No	Yes—memory dump is created No—memory dump is not created
19	Support old scripts	Set the checkbox	Sets the support of program tools in Intellect	Boolean type	No	Yes—both scripts and programs are supported No—only scripts are supported
20	Time synchronization	Set the checkbox	Sets the time synchronization of all computers in the distributed system with system time of this computer. Time is automatically synchronized at midnight every 24 hours or when Intellect is started on the Server that is the source of time synchronization	Boolean type	No	Yes—synchronization is enabled No—synchronization is disabled
21	Overlay in Event protocol	Select the value from the drop-down list	Sets the overlay mode for processing the video signals that can be viewed with the help of the Event protocol object	Names of overlay modes	Overlay 2	None—video signals are not processed by video card Overlay 1—Direct3D is used Overlay 2—DirectDraw is used
22	Application language	Select the value from the drop-down list	Sets the Intellect Software System's interface language	Names of installed languages	—	Depends on the set of installed languages. The process of installing languages is described in Intellect Software System's interface language

Page tree

Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.