Go to documentation repository
Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.
Previous page
Next page
Contents
Intellect base
| XML file | Parameter | Available values | Default | Product version | Parameter in effect |
|---|---|---|---|---|---|
| <Archive storage drive>:\VIDEO\Settings.xml | RotateAngle | 0, 90, 180, 270 | 0 | Sets the rotation angle of video image in the archive. If the rotation angle is specified in the video camera settings (see Configuring a rotation angle of video image), then this parameter is set automatically in Settings.xml file. In Axxon player the archive is rotated at the specified angle when being played back or exported. | |
| SyncedTime | Date and time in the following format: DD-MM-YY hh:mm:ss | - | Shows time of last import from edge storage as DD-MM-YY hh:mm:ss The import is performed from the time specified in the parameter if the number of hours does not exceed the time set by IpStorageSyncDepthHours registry key (see Registry keys reference guide) The parameter can be changed by UPDATE_TIME command (see IPSTORAGE Edge storage). | ||
| C:\ProgramData\elasticsearch-2.0.1\config\elasticsearch.yml | http.port | 0 - 65536 | 9200 | up to Intellect 4.10.2 | The parameter sets the port occupied by Elastic Search search engine. The value is to be the same as one specified in the cam_title.run.config file (see below). |
| C:\ProgramData\elasticsearch-5.2.2\config\elasticsearch.yml | Intellect 4.10.3 and later | ||||
| <Intellect instalation>\Modules\cam_title.run.config | ElasticSearchPort | 0 - 65536 | 9200 | The parameter sets the port Intellect sends data for Elastic Search search engine to. The value is to be the same as one specified in the elasticsearch.yml file (see above). | |
| <Intellect instalation>\SlaveSettings.xml | DNS | - | - | - | This file stores the addresses of DNS servers specified using the Advanced Setup utility (see The Settings panel of the DNS section). |
| <Intellect instalation>\Modules\cam_title.run.config | SearchIndex | True, False | True | up to Intellect 4.11.1 | Enables the use of the Elastic Search search engine for titles search. True – Elastic Search is in use. False – Elastic Search is not in use. |
| False | Intellect 4.11.2 and later |
Intellect Web Report System
| XML file | Parameter | Available values | Default | Product version | Parameter in effect |
|---|---|---|---|---|---|
| <Directory of the Intellect software installation>\Modules\Wt2\Web.config | CamMonitorShift | -5000 - 5000 | 0 | Sets shifting of video start while report viewing in milliseconds: >0 – video will start later than time specified in a report <0 – video will start earlier than time specified in a report | |
| FaceReplaceCameraIpFrom | IP-address | - | up to 3.2 | Changes internal IP-address of a Server specified in the Architecture while viewing video for POS reports and for "Face" module report from outside | |
| FaceReplaceCameraIpTo | IP-address | - | up to 3.2 | Changes external IP-address of a Server specified in the Architecture while viewing video for POS reports and for "Face" module report from outside | |
| WorkThroughGateway | true, false | false | from 3.3 | Enables receiving video from Gateway while viewing video for POS reports and for "Face" module report. A Gateway is selected authomatically. | |
| CommandTimeout | Time in seconds | 200 | Enables setting the timeout in seconds, during which waiting for data retrieval and report generation should occur. | ||
| PersonNameLength | >=0 | - | 3.4 | By default, the parameter is not added to the file (corresponds to value 1). Add it to the <appSettings> section in the following format: <add key = "PersonNameLength" value = "5" /> The parameter limits the user's patronymic to the number of characters specified in the value parameter for Access Manager and Time&Attendance reports. Example (if value = "5"): Ivanov Peter Alex. | |
| PersonNameIncludesId | 0, 1 | - | 3.4 | By default, the parameter is not added to the file (corresponds to value 0). Add it to the <appSettings> section in the following format: <add key = "PersonNameIncludesId" value = "1" /> The parameter allows enabling display of the user ID in parentheses after the user full name in the Access Manager and Time&Attendance reports. value = "1" - the user ID in parentheses is displayed after the user full name. Example: Ivanov Peter Alexandrovich (1) value = "0" - the user ID is not displayed. | |
| SweatheartingEnabled | 0, 1 | 0 | 3.4 | Enables the Sweethearting report. | |
| SweatheartingAddItemPosFunctionNumber | >=0 | - | 3.4 | Sets the Adding product to document function number from the dbo.FuncDic table, which is necessary for the Sweethearting report proper operation. | |
| SweatheartingBeginReceiptPosFunctionNumber | >=0 | - | 3.4 | Sets the function number used as the receipt beginning from the dbo.FuncDic table. | |
| SweatheartingEndReceiptPosFunctionNumber | >=0 | - | 3.4 | Sets the function number used as the receipt ending from the dbo.FuncDic table. | |
| SweatheartingFilterByReceiptIntervals | 0, 1 | 0 | 3.4 | Enables the sweethearting events filtering so that only the events which occured while the receipt was open were displayed in the Sweethearting report. | |
| SweatheartingAddTimeoutMs | >=0 | 500 | 3.4 | Sets the timeout between the sweethearting detector event and the POS event. If this timeout is exceeded, the sweethearting event is added to the Sweethearting report. | |
| SweatheartingBeepEnabled | 0, 1 | 0 | 3.4 | Disables the sound notification about new events in the Sweethearting report. | |
| SweatheartingStepCount | >=0 | 1000 | 3.4 | Sets the required number of the events which should be preloaded on the first Sweethearting report launch. | |
| SweatheartingPreloadDays | >=0 | 140 | 3.4 | Sets the required number of days the events from which should be displayed on the first Sweethearting report launch. | |
| ExtendedPresenceReportInWorkplace | true, false | false | only 3.4 | Enables an advanced display of the reports: Presence at workplace report and Total report on the presence at the workplace. | |
| EnablePasskindReport | true, false | false | 3.4 | Activates an Issued pass cards report. | |
| lpServerUrl | IP address of the http://localhost:[port]/[object] form | http://localhost:22441/core | 3.4 | Sets the IP address of the server the data from which is used to build reports. http://localhost:22441/core—address for the Access Manager reports. The port number is determined by the Restport key, the default is 22441. http://localhost:10001/lprserver—address for the AUTO reports. The port number is determined by the URMLPR\Restport key, the default is 10001. http://localhost:10000/firserver—address for the reports using the Face Recognition Server. The port number is determined by the FRS\Restport key, the default is 10000. See also Registry keys reference guide | |
| IntellectVideoStreamNumber | 0-4 | 0 | 3.4 | Sets the required camera stream number in live video reports (0 is the first camera stream). | |
| ShowIconNewCashier | true, false | true | 3.4 | Highlights the new cashier's name in POS reports with the asterisk and the different color (the new cashiers are those who work less than a number of days specified in the CountDaysNewCashier key). | |
| CountDaysNewCashier | >=0 | 30 | 3.4 | Sets the number of days within which the cashier is considered a new one (the key is used together with the ShowIconNewCashier key). | |
| QueueLengthDelta | 0, 0.5 | 0.5 | 3.4 | Sets the values threshold that are included into the table reports by Queue Length detectors: 0 - values equal to 0 and greater are included in the report. 0.5 - only the values greater than 0.5 are included in the report. | |
| GenderAnalyticsUrl | IP address | http://localhost:10000/firserver | 3.5 | Sets the address of the server where the Face Recognition Server is located (see Configuring the Gender analytics report). | |
| ReportSystemHost | IP address | localhost | 3.5 | Sets the address of the server on which the Intellect software package is located. It is necessary for the Face recognition report (see Face recognition report) and Report by employee passes with photo (see Report by employee passes with photo). | |
| <Intellect installation directory>\Modules\Wt2\App_Data\Settings\DateFormat.config | ServerDateTimeFormat | Date and time format | d MMMMM yyyy HH:mm:ss | 3.4 | Sets the date and time format in General Reports (see Configuring the date and time format in General Reports). |
| <Intellect installation directory>\Modules\Wt2\App_Data\Mail\web.config | <configuration><system.net><mailSettings><smtp> from | String | - | - | Email address from which the auto-generated reports will be sent (see SMTP Server setup). |
| <configuration><system.net><mailSettings><smtp> host | String | - | - | SMTP Server name (see SMTP Server setup). | |
| <configuration><system.net><mailSettings><smtp> password | String | - | - | Password of the account used for sending the messages to SMTP Server (see SMTP Server setup). | |
| <configuration><system.net><mailSettings><smtp> port | >=0 | 25 | - | Port number used by SMTP Server (see SMTP Server setup). | |
| <configuration><system.net><mailSettings><smtp> userName | String | - | - | Name of account used for sending the messages to SMTP Server (see SMTP Server setup). | |
| <configuration><system.net><mailSettings><smtp> enableSsl | true, false | false | - | Enables the SSL encoding to connect to the SMTP Server (see SMTP Server setup). | |
| <Intellect installation directory>\Modules\Wt2\App_Data\Settings\Settings.config | CurrencyFormat | String | ₽ | 3.5 | Sets the currency display format for the report by the number of goods with specific action. |
| IsPersianLanguageUse | true, false | false | 3.5 | Enables the numbers filtering using the Persian alphabet and numbers. Note. If this key is set to true, then the IsArabicLanguageUse key should be set to false. | |
| IsArabicLanguageUse | true, false | false | 3.5 | Enables the numbers filtering using the Arabic alphabet and numbers. Note. If this key is set to true, then the IsPersianLanguageUse key should be set to false. |
FACE-Intellect
| XML file | Parameter | Available values | Default | Parameter in effect |
|---|---|---|---|---|
| <Directory of the Intellect software installation>\Modules\face_client.run.config | ProblemImages | Path to a folder | None | Specifies the path to the folder for storing images which have been skipped (there are 2 or more faces in the image, or the face was not recognized due to the poor image quality) during the automatic adding of faces from the folder (see Adding images to the reference face database). The specified folder will be created automatically. Note. If %USER% is specified in the parameter value, the images which haven't been added to the database will be stored in the folder: C:\Users\%LOGGED_USER%\AppData\Local\AxxonSoft\FaceIntellect\ProblemImages\ |
| Timeout | >=0 | 60000 | Specifies the waiting timeout for the face search results in milliseconds. | |
| Port | >=0 | 10000 | Specifies the TCP port for face_client.run. | |
| RemoteUrl | IP address | none | Specifies the sending address of the HTTP POST request. It is used for the images transfer to an external system (see Configuring the images transfer to an external system). | |
| AnalitycTimeout | >=0 | 1000000 | Specifies the time in milliseconds for refreshing the analytical data in the Face recognition and search interface object. When the time expires, the Operation has timed out error will be displayed (see Viewing the analytical data). | |
| PasserByFramesPerCamera | >=0 | 10 | Specifies the maximum number of comparison results for one camera. A value of 0 means that the number of comparisons is unlimited. | |
| HideViewButton | true, false | False | Hides the “View” button from the interface for monitoring of captured and recognized faces (see Monitoring of captured and recognized faces). | |
| SimpleMode | true, false | False | Enables the Simple mode of monitoring, which makes the upper part of the Face recognition and search interface window hidden, and such operations as working with the reference face database, face searching in the video archive, and some others unavailable (see Enabling the Simple mode of captured and recognized faces monitoring). | |
| AutoFollowTimeSeconds | >=0 | 120 | Specifies the time in seconds after which the Follow new faces checkbox will be set automatically, if it is unset. The 0 value means that the checkbox will not be set automatically (see Monitoring of captured and recognized faces). | |
CounterRowCount | >=0 | 0 | Specifies the maximum number of rows (unique faces) in the generated report on analytical data (see Viewing the analytics). The 0 value means there is no limit. | |
| HideCheckBoxIntellectPerson | true, false | False | Hides the Create a user in the Intellect database checkbox and assigns a unique Person_ID to each face when adding it to the reference face database (see Adding images to the reference face database). | |
| HideResultsWithoutImages | true, false | False | Hides the face search results with the face images damaged due to the emergency shutdown of the FACE-Intellect server. | |
<Directory of the Intellect software installation>\Modules64\firserver_replicate.run.config | LogBadImages | true, false | False | Enables saving "bad" photos of faces when the Face database replication module is used (see Face database replication). Photos of faces which could not be added will be saved on the main Server in the folder <Directory of the Intellect software installation>\Modules64\Firserver_replicate_problem_images |
Axxon Player
| XML file | Parameter | Available values | Default | Parameter in effect |
|---|---|---|---|---|
<Intellect installation directory>\Tools\Axxon_player.xml | Most of the parameters are filled in automatically in the Axxon Player interface. Below are the options that are not available in the interface. | |||
| Render | 0, 1 | 1 | Sets the type of render: 0 - rendering is performed in OpenGL. 1 - rendering is performed in Direct3d. | |
Overview
Content Tools