Configuring the radio button

Configure the radio button as follows:

1. On the Logic tab, select the element in the table and click the Edit button.
   
2. If necessary, in the Step description field (1), enter the text that will be displayed in the column to the left next to the element.
   

3. From the Number of elements list (2), select the required number of radio buttons.

   Note

   The maximum number of elements is determined by the possible number of columns when you display the logic (see Configuring the display of logic).

4. In the Element name fields (3), enter the values ​​of the radio buttons.
5. From the Number of conditions list (4), select the number of different logics to proceed the event handling. In this case, each logic implies the value ​​that the operator selected. For each value, you can set the next element to display.
6. If you want to display the same element at any selected value, set up this element in the Logic group (5). If you use several logics, set up each logic settings in the Logic [N] group (6), where N is the logic number. To set it up, do the following:
   1. In the Conditional transition field, select the element that must be displayed next.
   2. If you also want to execute a macro, select it from the Macro list.
   3. Select the value of the radio button, at which the above actions will be performed.
7. Click the OK button.

Example of displaying the Radio button element:

Configuring the radio button is complete.