Documentation for ACFA PSIM

Previous page Next page


After you connect Axis to ACFA PSIM, a Door (OnvifAcfa) object, which corresponds to the Axis door, will be automatically created under the Security equipment object.

Note

If the controller is configured in the One door entry and exit mode, then there should be only one Door (OnvifAcfa) object in the device tree.

If the controller is configured in the Two-door mode, then there should be two Door (OnvifAcfa) objects in the device tree. To add the second Axis door, it is necessary to create a Door (OnvifAcfa) object on the basis of the Security equipment object.

To configure the Axis door, do the following:

  1. Go to the settings panel of the Door (OnvifAcfa) object.
  2. In the address field (1), enter the door address that is specified in the Axis device web interface.
  3. Click Apply (2) to save the changes.
  4. Configure the second door in the same way, if necessary.

Axis door setup is complete.

  • No labels