Previous page Managing the configuration of a Gate controller  Configuring the Gate controller parameters Next page


To configure the connection of a Gate controller, do the following: 

  1. Go to the settings panel of the relevant Gate parking access point object.
  2. From the Address drop-down list select the controller address (1).
  3. Click Apply.

Note:

If the controller with specified address is connected to the Intellect Server, you will see the following controller parameters in the Controller version group (2):

    1. controller version;
    2. controller firmware version;
    3. controller operation mode.

If the controller parameters are not shown, check the controller's connection to the computer (refer to the Gate ACS vendor documentation).

The Gate controller is now configured.