Previous page Next page


Configuring a Biometric Identification Server is required if the controller / terminal is configured for the Server identification system mode (see Configuring BioSmart UniPass and Biosmart PV-WTC).

The Biometric Identification Server is set as follows:

  1. Go to the settings panel of the Biosmart Palm Vein head object.

  2. In the Identification Server group, select Yes from the Use drop-down list (1).
  3. In the Local IP (2) field, enter the local IP address of the Biometric Identification Server.
  4. In the Local port (3) field, select the local port number of the Biometric Identification Server.

  5. From the Matching accuracy (4) drop-down list select the precision of matching.

    Note

    The higher the accuracy of the match, the longer it takes to check the matching of the palm pattern, but the safety is higher.
  6. Set the Anti-fake checkbox (5) to enable protection of biometric readers from bringing objects other than the palm of the hand (so that the controller does not react, for example, on palm photo).
  7. Click Apply to save changes (4).

Configuring the Biometric Identification Server is completed.

  • No labels