Previous page Next page


The MK7 keyboard is configured through the settings panel of the GD Keypad MK7 object. This object is created from the Galaxy Dimension v.2 object on the Hardware tab of the System settings dialog box.

Note.

The GD Keypad MK7 object must match the Galaxy Dimension v.2 panel to which the keypad is connected.

The MK7 keyboard is configured as follows:

  1. Go to the settings panel of the GD Keypad MK7 object.
  2. From the Address drop-down list select the address displayed for the specific keypad into the operator’s menu of the Galaxy Dimension v.2 control panel (1).
  3. Set the PIN code confirmation checkbox if it's required to confirm operations using PIN code (2).
  4. Click Apply to save changes.
  5. Repeat steps 1-4 for all MK7 keypads connected to the panel.

Configuration of the MK7 keypad is completed.

  • No labels