Previous page Next page


To configure the Nitgen ACS connection to the ACFA Intellect Server use the relevant NITGEN object which is created on the basis of the Computer object on the Hardware tab of the System settings dialog object.

To configure the Nitgen integration module's connection, do the following:

  1. Go to the NITGEN object's settings panel.
  2. In the Thread count: field enter the number of data processing threads (1).
  3. In the ReadBuffer Max: field enter the maximal size of buffer which will save data received from terminals (2).
  4. In the WriteBuffer Max: field enter the maximal size of buffer which will save data to be sent to terminals (3).
  5. In the Terminal Count: field enter the number of terminals connected to the server simultaneously (4).
  6. In the IO ReadBuffer Max: filed enter the maximal size of data which will read in the network at one time (5).
  7. In the IO WriteBuffer Max: filed enter the maximal size of data which will be written in the network at one time (6).
  8. In the Server IP: filed enter the IP-address of server (7).
  9. In the Port: field enter the number of the COM port to connect to Nitgen ACS (8).
  10. In the Length of user ID (1-2): field enter the length of user ID (9).
  11. In the Timeout: field enter the timeout of connection (10).
  12. Set the Dynamically checkbox to send data to the controller dynamically (11).
  13. Click Apply to save changes.

Configuring of the Nitgen ACS's connection is completed.

  • No labels