Configuring the Paxton IO Board

Paxton IO Board is configured in Intellect on the IO Board object settings panel. The object is created under the ACS Paxton NET2 object on the Hardware tab of the System settings dialog box.

In order to configure Paxton IO Board, proceed as follows:

1. Go to the IO Board object settings panel.
   
2. Enter the MAC address of the device in the Mac adress (1) field.

3. Click Read inputs config (2) to read configuration of inputs from the device.

   Note.

   As a result, the IO Input objects are created under the IO Board object (see Configuring the Paxton IO Input).

4. Click Apply (3) to save changes.

Paxton IO Board configuration is completed.