Basic door configuration

To configure a KeyKing door, do the following:

1. Go to the TC3XY Door object's settings pane.
   
2. Use the up/down buttons to enter the hardware address of the door connection in the Number field (1).
3. Select the door's normal state from the State dropdown list (2).
4. From the Enter dropdown list, select the Section object that corresponds to the area to which this door exits (3).
5. From the Exit dropdown list, select the Section object that corresponds to the area to which this door enters (4).
6. Set the door status timetable as follows:
   1. Click the Door Status Time Table button (5). A window for configuring the door status timetable will open.
      

   2. To add a new status, click the Add button (1).

      Note:

      To delete a status from the list, select a cell in the corresponding row and click the Delete button (2).
   3. The Number column displays a serial number for each status (3).
   4. From the Entry Status dropdown list, select the status that should be assigned to the door during the specified time (4).
   5. In the start time field, use the mask and the up/down buttons to enter the time the status should take effect (5).
   6. Check the boxes corresponding to the days of the week on which the specified status should be applied to the door being configured (6).

   7. To save the changes, click the Apply button (7).

      Note:

      To close the window for configuring the door status timetable, click the Cancel button (8).
7. Click the Apply button (6).

This completes the configuration of the KeyKing door.