Previous page Next page


The AIO alarm panel's inputs are configured on the settings panel of the corresponding object. An Apollo Loop object is created based on an AIO Alarm Panel object.

Alarm inputs are configured as follows:

  1. Go to the Apollo Loop object's settings panel.
  2. From the Alarm input dropdown list select the alarm input's index number (1).
  3. Check the Enabled checkbox if the alarm input is operational (2).
  4. Check the Tamper sensor normally opened checkbox if the alarm events are to be received while destroying or tampering the sensor cabinet (5).
  5. Check the Sensor normally opened checkbox if the alarm input should be in its normal state (non-alarm state) when the contacts are open (4).
  6. If the alarm input should be disarmed upon entrance, set the corresponding option (5).
  7. In the Entrance delay field, enter the time period (in seconds) in which the alarm input will be disarmed on entrance (6). 
  8. In the Exit delay field, enter the time period (in seconds) in which somebody can exit once the alarm input has been armed (6). 
  9. To save any changes made, click the Apply button (8).

This completes the configuration of the AIO alarm panel's inputs.