Documentation for Auto Intellect 5.0. Documentation for other versions of Intellect is [available too].

To set up a speed-trap device in Auto-Intellect, the Speed-trap server system object should be created and set up.

The Speed-trap server object setup includes the following steps:

  1. Set up the connection between the Speed-trap device and the Auto-Intellect software package.
  2. Select a camera for the joint operation of the Radar and Auto-Uragan 3.5.0.29 or CARMEN-Auto modules.
  3. Specify the speed limit.
  4. Setting the permitted vehicle speed for displaying in the report concerning the recognized number.
  5. Select the Speed-trap device model and settings.
  6. Select the vehicle movement direction relative to the Speed-trap, needed to determine the vehicle speed.
  7. Specify the distance between the speed-trap and the vehicle position at the moment of speed detection.
  8. Set up additional parameters related to joint operation of the speed-trap device and the Radar module.
  9. Specify the minimum vehicle speed to be detected by the speed-trap.

These steps are described in more detail in the following sections.