Selecting the camera to be used by the Traffic Detector

To set up Traffic Detector select the camera to send the video image to the module. The selected Camera object should represent the video camera directed at the driving lanes. This object should be created and set up beforehand in the Intellect package (see the Intellect Software Package. The Administrator's Guide for the details of the Camera object setup).

To select the camera for Traffic Detector, do the following:

1. Open the Hardware tab in the System Settings window (1).
2. In the object tree on the left side of the Hardware tab, select the Traffic Detector object representing the Traffic Detector module to be set up. The settings panel of the selected object will open on the right side of the window (2).
   
3. In the Camera drop-down list select a Camera object (3).
4. Click Apply (4).

The camera is now linked to the Traffic Detector.