Documentation for Auto Intellect 5.1. Documentation for other versions of Intellect is [available too].

Previous page Next page

Speed-traps are connected to the server via the COM port. Any number of speed-trap devices can be connected to Auto-Intellect, depending on customer needs.

Specialized protocol is used for data exchange with the speed-traps via the COM port. Each Speed-trap uses its individual protocol for data exchange.

Several COM ports should be set up one by one. Each speed-trap device is represented by a separate Speed-trap server object created and set up in the Hardware tab of the System Settings window.

To set up a COM port for speed-trap connection, do the following:

  1. Open the Hardware tab in the System Settings window.
  2. In the object tree on the left side of the Hardware tab, select the Speed-trap server object representing the Radar module to be set up. The settings panel of the selected object will open on the right side of the window.
  3. In the Port drop-down list, select the COM port to connect the speed-trap (3).
  4. Click Apply to save all changes.

The speed-trap is now connected to the server.