Viewing the data about the last identified vehicle

Viewing the data about the last identified vehicle is performed in the group Last event of On-line monitor window.

Viewing the data about the last identified vehicle is performed in the following way:

1. In field 1 there is displayed a vehicle's video frame with a sign (1).
   

2. Identified vehicle's plate is displayed in Field 2 (2).

   Note.

   If the plate hasn't been recognized, Unidentified message will be displayed in the field.

3. In the Detector field the name of plate's detector is displayed (the name of the corresponding object LPR channel) (3).

4. In the Country string there is displayed a country in accordance with the identified number (4).

   Note.

   The country is displayed only in case when the Uragan or CARMEN-Auto modules are used for recognition.

5. Camera's installation address is displayed in the Address string (5).
6. Camera's identifier number is displayed in the ID (№) string (6).
7. Certificate's number is displayed in the Certificate string (7).
8. The date, until which verification is valid is displayed in the Verification valid string (8).
9. In the Receiving time string the date and receiving time of vehicle's information is displayed  (9).

10. In the Speed string the vehicle's speed is displayed (10).

    Note.

    In case, if Uragan or CARMEN-Auto modules are used for identification and Radar module is not connected, zero speed value is displayed.

    Note.

    Depending on Vehicle Tracer settings the speed is displayed in km/h or m/h (see the document Auto-Intellect software package: Administrator's guide).

11. In the Permitted speed string maximum permitted speed on this road's area is displayed  (11).
12. In the Validity string validity of identified plate in percent is displayed  (12).
13. In the Direction string the vehicle's direction (Towards the camera or Off the camera) is displayed  (13).

Viewing the data about the last identified vehicle is over.