Using filters in the protocols

There is a possibility to select events to be displayed in the identified vehicles protocol and alarms protocol.

Events may be selected, using the following events:

1. speed;
2. overspeeding;
3. plate;
4. validity;
5. region;
6. direction;
7. alarm type;
8. identifiers.

Selection of filters, used in the protocols, is done in the following way:

1. Click Filter button in the On-line monitor window (1).
   
2. Filters dialog window will be displayed in result.
   
3. From the Speed list (1) select the required filter according to vehicle's speed, then enter the threshold value of the speed in the field(s) in km/h.
   The following speed filters are available:
   3.1 No filtering — the event is displayed in protocols with any vehicle's speed.
   3.2 More — the event is displayed in protocols in case when vehicle's speed is over threshold value.
   
   3.3 Less — the event is displayed in protocols in case when vehicle's speed doesn't exceed the threshold value.
   
   3.4 Interval — the event is displayed in protocols in case when vehicle's speed corresponds to the entered range of threshold value.
   

4. From the Speeding list (2) select the required vehicle's overspeeding filter and then enter threshold value of overspeeding in km/h.
   The following overspeeding filters are available:
   4.1 No filtering — the event is displayed in protocols with any vehicle's overspeeding.
   4.2 More — the event is displayed in protocols in case when vehicle's overspeeding is over the threshold value.
   

   Note.

   The threshold value is calculated as a difference between the fixed vehicle's speed and the speed, permitted in the controlled area of the road.

5. From the License plate number list (3) select the required vehicle's plate filter and then in the field enter the number or its part which identification leads to event's displaying in protocols.
   The following plate filters are available:
   5.1 No filtering — the event is displayed in protocols with any vehicle's plate.
   5.2 Register — vehicle's event is displayed in protocols in case, when vehicle's plate exactly matches the entered value.
   
   5.3 Contains — vehicle's event is displayed in protocols in case, when vehicle's plate contains the entered value.
   

   Note.

   The expression, given for filters Register and Contains, may include usual characters and characters «*», stating for an unidentified plate's character. If the expression contains one or several characters «*», there are displayed only plates, containing unidentified characters in the set combination, in the protocols.

6. From the Validity list (4) select the required filter on percent of vehicle plates recognizing and then enter the threshold value of recognizing validity in the opened field (s).
   The following validity filters are available:
   6.1 No filtering - events are displayed for those vehicles which plates are recognized with any validity.
   6.2 More - events are displayed in the protocol if the recognizing validity is higher than the specified value.
   
   6.3 Interval - vehicle event is displayed in the protocol if the recognizing validity of vehicle plate belongs to the specified range of threshold values.
   
7. From the Region list (5) select the required region's filter, where the vehicle has been registered, and then enter region's number in the appeared window (5).
   The following region's filters are available:
   7.1 No filtering — the events are displayed in protocols of the vehicles, registered in any region.
   7.2 Equal — the events are displayed in protocols of the vehicles, registered in the given region.
   
8. From the Direction list (6) select vehicle's direction with which the event should be displayed in protocols.
   The following direction filters are available:
   8.1 No filtering — the vehicle's events are displayed in protocols with any direction in respect of the plates identification camera.
   8.2 From camera — the vehicle's event is displayed in case, when the vehicle was moving from the camera.
   
   8.3 Towards the camera — the vehicle's events are displayed in protocols in case, when the vehicle was moving towards the camera.
   
   8.4 Undefined — the vehicle's events are displayed in protocols in case, when the vehicle direction in relation to the camera has not been determined.
   
9. From the Alarm type list select the alarm type (7). Only alarms of the selected type will be displayed in protocols.
   The next alarm type filters are available:
   9.1 No filtering — the vehicle's events are displayed in protocols with any alarm type or its absence.
   9.2 Overspeeding — the vehicle's events for which overspeeding has been registered are displayed in protocols.
   
   9.3 LP found in database — the vehicle's events which plates have been found in the external plates database are displayed in protocols.
   
   9.4 Alarm set by operator — the vehicle's events, initialized manually, are displayed in protocols.
   
   9.5 Running a red light — the vehicle's events for which running a red light has been registered are displayed in protocols.
   
   9.6 Entered the oncoming lane — the vehicle's events for which entering the oncoming lane has been registered are displayed in protocols.
   
   9.7 Crossed the stop line — the vehicle's events for which crossing the stop line has been registered are displayed in protocols.
   
   9.8 Stop over crosswalk line – the vehicle's events for which stopping on the crosswalk line has been registered are displayed in protocols.
   
10. In the group Plates recognizers (8) set the checkboxes for those LP recognition Servers, which data have to be displayed in protocols.
11. Click OK to save filters settings and close the Filters dialog window (10).

Selecting the filters, used in protocols is over.

There is possibility to disable filters without changing the settings in Filters dialog window. Click the button Show all for it (2). All the registered events will be displayed in protocols in result. To resume the usage of filters, this button should be repeatedly pressed.