Documentation for Auto Intellect 5.6. Documentation for other versions of Intellect is available too.

Previous page Configuring the Auto-Intellect software package and setting up its components  Configuring the program modules Next page


Auto Intellect configuration is performed on the basis of the Intellect software platform. The necessary system objects for video subsystem performing are considered having already been configured and set up (see Configuring video subsystem).

The second stage in configuring Auto Intellect is to create and set up system objects, necessary for processing the received video in order to identify plates, speed and type of the vehicle in the video surveillance area, and also to create databases for storing the received information.

Note

The database of identifiers/detections and the object from which the data is received to this database must be located on one computer for the correct operation of Auto Intellect.

The program module Traffic Detection is used to identify the type of the vehicle. The Radar module is used to identify the speed of the vehicle.

If the ARENA module is used and Auto Intellect is set up, create and set up the following objects:

  1. LPR channel (should be only created, not set up);
  2. ARENA module;
  3. Vehicle Tracer interface object.

If the LP recognition modules are used and Auto Intellect is set up, it is necessary to create and set up the following objects:

  1. LPR channel;

    Note

    The LPR channel object is used to create the multipurpose settings of the recognition modules.

  2. The corresponding LP recognition module (see Activating the software module used for identifying the plates).

    Attention!

    With the growing number of CARMEN-Auto identifiers on the Auto Intellect server the rate of video processing by every identifier goes down, that results in lesser percent of the identified characters. Results delay and missing of frames are also possible. The rate of video processing by CARMEN-Auto can also depend on the model, resolution, color and other camera's parameters.

  3. Radar module (if LPR channel is used simultaneously with Radar module);
  4. External Plates DB (if LPR channel is used simultaneously with external Plates database);
  5. Vehicle Tracer interface object.

To set up Auto Intellect, when Vehicle Tracer is used, the following system objects should be created and set up:

  1. Traffic Detection;
  2. Traffic Monitor interface object.

To set up the subsystem, gathering information about vehicle streams, the following system objects should be created and set up:

  1. IntelliVision vehicle detection;
  2. Vehicle Processor.
  • No labels