Documentation for Auto Intellect 5.7. Documentation for other versions of Intellect is available too.

Previous page Configuring the Auto Intellect software package and setting up its components  Configuring the program modules Next page


The Auto Intellect software configuration is performed on the basis of Intellect software platform. Necessary system objects for video subsystem performing are considered to have already been configured and set up (see Configuring video subsystem section in the reference manual Intellect software package: Administrator's guide).

The second stage in configuring the Auto Intellect software is to create and set up system objects, necessary for processing the received video in order to identify plates, speed and type of the vehicle in the video surveillance area and also to create databases for storing the received information.

Note.

The database of identifiers/detections and the object from which the data is received to this database are to be located in one computer for correct working of Auto Intellect software package.

The program module Traffic Detection is used for identifying the type of the vehicle. The Radar module is designed for identifying the speed of the vehicle.

If the ARENA module is used and the Auto Intellect software should be set up, create and set up the following objects:

  1. LPR channel (should be only created, not set up);
  2. ARENA module;
  3. Vehicle Tracer interface object.

If the LP recognition modules are used and the Auto Intellect software should be set up, it is necessary to create and set up the following objects:

  1. LPR channel;

    Note.

    LPR channel object is designed for creating the multipurpose settings of the recognition modules.

  2. The corresponding LP recognition module (see Activating the software module used for identifying the plates).

    Attention!

    With the growing number of CARMEN-Auto identifiers on the Auto-\ Intellect server the rate of video processing by every identifier goes down, that results in lesser percent of the identified characters. Results delay and missing of frames are also possible. The rate of video processing by CARMEN-Auto can also depend on the model, resolution, color and other camera's parameters.

  3. Radar module (if LPR channel is used simultaneously with Radar module);
  4. External Plates DB (if LPR channel is used simultaneously with external Plates database);
  5. Vehicle Tracer interface object.

To set up the Auto Intellect software, when Vehicle Tracer is used, the following system objects should be created and set up:

  1. Traffic Detection;
  2. Traffic Monitor interface object.

To set up the subsystem, gathering information about vehicle streams , the following system objects should be created and set up:

  1. IntelliVision vehicle detection;
  2. Vehicle Processor.
  • No labels