Documentation for Detector Pack 2.8. Documentation for other versions of Detector Pack is available too.

Previous page Next page


The VideoIntellect embedded detector module is configured on the settings panel of the VideoIntellect embedded detector object created on the basis of the Camera object on the Hardware tab of the System settings dialog window.

The VideoIntellect embedded detector module is configured as follows:

  1. Go to the VideoIntellect embedded detector object settings panel.
  2. From the Detection type drop-down list (1), select the required detection tool:
    • Abandoned objects detection.
    • Prohibited zone motion detection.
    • Camera state detection.
    • Prohibited direction motion detection.
    • Other.
  3. Click the Configuration setup button (2) to configure the selected detection tool. As a result, the Detection settings window will open (for details, see Configuring VideoIntellect detection tools).
  4. In the Frame rate limit field (3), enter the maximum number of frames per second that will be processed by the selected detection tool.
  5. Set the Show objects on image checkbox (4) if it is necessary to highlight the detected object with a frame on the image in the Monitor interface object window.
  6. Click the Apply button (5).

The VideoIntellect embedded detector module is now configured.

  • No labels