Documentation for Detector Pack 2.8. Documentation for other versions of Detector Pack is available too.

Previous page Next page


The requirements for the cameras that will work with the Person location tracker module are listed in the following table.

Video stream from camera

  • The resolution is at least 640x360 pixels. It is also not recommended to use a resolution higher than 1920×1080, since higher resolution does not increase the detection quality, but significantly increases the consumption of resources. The optimal resolution for solving typical tasks is 1280x720.
  • The frame rate per second in the video stream from the camera is at least 8.
  • Color image only

Lighting

  • Lighting in the scene is at least 50 lux per square meter. In conditions of insufficient or excessive lighting (night or light-striking), stable operation of the video analytics is not guaranteed.
  • There are no abrupt changes in lighting

Scene and camera angle

  • Moving objects are visually separable from each other.
  • The background is mostly static and does not change abruptly.
  • Moving objects are minimally obscured by static objects in the scene (columns, trees, etc.).
  • The analyzed scene does not have reflective surfaces and sharp shadows from moving objects. If present, they should be masked.
  • Camera shake does not result in image offsets greater than 1% of the frame size

Objects image

Objects image requirements for Person location tracker

Attention!

Correct operation of the Pose detection tools is not guaranteed when using fisheye cameras and other cameras with strong image distortion.

  • No labels