Installing the Axxon Next Client in Linux OS

To install the Axxon Next Client in Linux OS, do the following:

1. For the automatical installation from the repository:

   1. Add the repositories by sequentially executing the following commands:

      echo 'deb [arch=amd64] http://download.axxonsoft.com/debian-repository stretch main' | sudo tee -a /etc/apt/sources.list.d/axxonsoft.list 
      echo 'deb [arch=amd64] http://download.axxonsoft.com/debian-repository stretch backports/main' | sudo tee -a /etc/apt/sources.list.d/axxonsoft.list 
      wget --quiet -O - "http://download.axxonsoft.com/debian-repository/info@axxonsoft.com.gpg.key" | sudo apt-key --keyring /etc/apt/trusted.gpg.d/axxonsoft.gpg add - && sudo apt-get update

   2. If you use Ubuntu 20.04, then install the mono-complete from the stretch repository:

      apt-get install mono-complete -t stretch

   3. Run the command:

      sudo apt-get install axxon-next-client

   4. During installation, it will be necessary to specify the maximum size of log files in megabytes and log level.
      
      

      Note

      The specified value can be changed (see Configuring the Axxon Next Client logging parameters on Linux OS). To do this, execute the command:

      sudo dpkg-reconfigure axxon-next-client

2. For the manual installation:
   1. Go to the downloaded deb-packages folder.

   2. Install libgdiplus-vms library:

      sudo dpkg -i libgdiplus-vms_*.deb

   3. Execute the following command:

      sudo dpkg -i axxon-next-client_4.3.3.8834_amd64.deb

      where 4.3.3.8834 is the version and build number.

After the installation is complete, the Client icon will be displayed in the application menu.

By default, at the first Client start, the OS interface language will be used. To change the language of the Client's interface at the first start, do the following:

1. Run the following command.

   sudo dpkg-reconfigure axxon-next-client

2. Select the required language.
   

   Note

   This should be configured separately for each OS user.