Page History

It is possible to use in the Auto-Intellect software package the following cameras with function of plates recognizing: VEGA Acsess and VEGA III by Tattile manufacturer.

Configuring of these cameras is performed the following way:

1. Go to the «Plate reader» Plate reader tab in the camera settings program and select the «General» General item of menu. From the «Acquisition Mode» Acquisition Mode drop-down list select the «FREEFREE_RUN» RUN value to send data by camera ().
   

...

1. Image Added
2. In the «Plate reader» Plate reader tab select the «EventsEvents/Actions settings» (Fig. 7.2—35).

...

1. settings.
   Image Added
2. In the displayed list click the «TCP TCP Message (Ocr Read)» parameter and configure it the following way in the opened box ():

...

1. .
   Image Added
   3.1 Enter the whole list of metadata in the

...

1. Message field considering the follows:
   specify

...

1. IMAGE_

...

1. BW to send frames by camera;
   only plates will be observed at minimum resolution;
   specify a date and time in the list to send time intervals to the database.
   

   At the moment of writing the document the following types are supported:

   %DATE%TIME%PLATE_STRING%PLATE_COUNTRY%OCRSCORE%SPEED%CLASS%DIRECTION%IMAGE_BW%PLATE_MIN_X%PLATE_MIN_Y%PLATE_MAX_X%PLATE_MAX_Y.

   3.2 Enter the IP address of the computer with installed Auto-Intellect software in the

...

1. Server IP field;
   3.3 Enter the number of port at which data will be sent in the

...

1. Server Port field. The fixed port for the Intellect software package is 32000. Ensure that this port is not used by other processes.

After the required settings are performed, create and configure the corresponding objects in the «AutoAuto-Intellect» Intellect software package:

...

1. Go to the «Hardware» Hardware» tab of the «Settings» Settings dialog box of the Auto-Intellect software. Create the «Video Video Capture Card» Card on the base of «Computer» Computer object. In the right part of «Hardware» Hardware tab the settings panel will display ():

...

1. .
   Image Added

1. Select the type of configured camera in the «Type» Type drop-down list (Fig. 7.2—37, 1).
2. Enter the IP address of connected device in the «IP address» IP address field (Fig. 7.2—37, 2).
3. Enter the number of port in the «Port» Port field (Fig. 7.2—37, 3). Default number of port is 31000.
4. To save changes click the «Apply» Apply button (Fig. 7.2—37, 4).

For working of remote identifier do the following:

1. Create the «Embedded detector» Embedded detector object on the base of «Camera» Camera ongect. Enter the «anpranpr-detector» detector value in the «id id in device form» form field. (Fig. 7.2—38)

...

1.  
   Image Added
2. To save changes click the «Apply» Apply button.

For license plates identification in the Auto-Intellect, create the "Remote detection" object on the base of the "LPR channel" object (Fig. 7.2—39) and configure the "LPR channel object" (see Setting up the LPR channel section).

Anchor_Ref380415357_Ref380415357Fig. 7.2—39 The "Remote recognition" object
Image Added
Configuring of VEGA Access and VEGA III cameras by Tattile manufacturer for working with the Auto-Intellect software package is completed.