Page History

...

1. In the System Settings dialog window, open the Hardware tab.
2. In the object tree on the left side of the Hardware tab, select the LPR channel, corresponding to the activated Auto-Uraganprogram module , Remote recognition, VIT or INTLAB program modules in the objects tree on the Hardware tab (see Activating the program module, used for identifying the plates section). The settings panel of the selected object will open on the right side of the window.
   
3. From the Direction drop-down list, select the required item (3).

4. If the from the camera or to the camera value is selected in the Direction dropdown list, the Record violation checkbox become active (4). By default this checkbox is set. That means that in case if the direction of vehicle moving is not coincide with the specified value, the Entering an oncoming lane alarm event will be created. If this event should not be created, uncheck the checkbox.

   Info
   title Note.
   The following variations are possible depending on selecting the traffic direction: if the to the camera direction is selected and the Record violation checkbos is set the recognition is performed in both direction; if traffic is performed from the camera the alarm event will be created; if the from the camera direction is selected and the Record violation checkbos is set the recognition is performed in both direction; if traffic is performed to the camera the alarm event will be created; if the to the camera direction is selected and the Record violation checkbos is not set the recognition is performed only in direction to the camera; if the from the camera direction is selected and the Record violation checkbos is not set the recognition is performed only in direction from the camera;

5. Click Apply (5).

...