Page History

...

Speed limit

No	Parameter name	Field type	Description	Representation	Default value	Value range
1	The Delay between commands (ms) field	Type-in the value	Sets the delay time between executing the commands for PTZ devices This parameter is not supported by IP cameras.	ms	250	No limitations. It is not recommended to change the default value.
2	The Delay by priority (ms) field	Type-in the value	Sets the delay time before switch from the PTZ control to a user with lower or equal priority.	ms	30000	No limitations. It is not recommended to change the default value.
The							Joystick group
3	The Minimum speed (1-10) field	Type-in the value	Sets the minimum rotation speed of PTZ devices.	Speed in standard units	1	1-10
4	The Maximum speed (1-10) field	Type-in the value	Sets the maximum rotation speed of PTZ devices.	Speed in standard units	10	1-10
The Joystick group
5	The Sensitivity (1-10) field	Enter the value in the field	Sets sensitivity of the joystick: the less value the more sensitivity. If value of parameter is small then camera will react on even small deviations of the joystick. If value of parameter is great the camera will stay fixed until significant deviation of joystick	Sensitivity in conditional units	5	1-10

Page tree