Page History

...

For automatic video stream selection to work, the Video stream setting check box must be selected in the configuration panel of the Camera object (see the section Configuration of multistream video) and more than one video stream from the camera must be integrated (refer to the list of IP devices integrated with Intellect, on the Drivers Pack documentation page).

A If function of video stream is selected as followsauto select is enabled, the Intellect software selects video stream the following way:

1. The streams indicated on the Advanced settings tab of the Camera object are selected (all streams that are not disabled).
2. From the streams chosen during the previous step, the streams that have a resolution greater than the resolution requested by the Client are selected. If no such streams exist, the streams with the highest resolution are selected.

3. From the streams chosen during the previous step, the streams that have a frame rate higher than the frame rate requested by the Client are selected. If no such streams exist, the streams with the highest frame rate are selected.

   Info
   title Note.
   The requested frame rate is specified during selection and configuration of cameras for the Monitor interface object, in the fps column on the List of cameras tab (see the section Selecting and configuring video cameras).

4. If multiple streams were selected during the previous steps, the stream among these that has the lowest bitrate is selected.

...