Page History

...

 To configure the remote web server, follow the steps:

1. Sync the web-server database with other Servers and Remote Admin Workstation databases (for example, via the centralized database of the administering Server, see INTELLECT™ software database management section).
2. Start the INTELLECT™ program on the web-server.
3. With web-server remote setup (e.g., from the administering Server), register the Computer object, which corresponds to the web-server, and set the interaction parameters with the Servers, Remote Admin Workstations, Remote Monitoring Workstations of the distributed video surveillance system (see Configuring the INTELLECT™software system with  Configuration of distributed architecture of the digital video surveillance system section). While local setting up the web-server the relevant Computer object is created automatically in the Hardware tab during the first startup.
4. Enable and configure the Web-server module (see Configuring the Web-server module section).
5. If no remote videogate is used, then enable nad configure the Videogate module (see Configuring the Videogate module section).
6. Configure the hardware performance tester and restart service (see Configuring the System restart service section).If auto options are to be used, create the macros and time zones, enable and configure the notification services (see Creating and using macros, Creating and using time zones and Notification services sections
7. Set up logging of events registered for the Web-server system objects (see  Configuring events logging).
8. Assign the users rights to work with the Web-server system objects (see Rights administration Configuration of users and permissions  section).Set up logging of events registered for the Web-server system objects (see Configuring the Event Viewer
9. If auto options are to be used, create the macros and time zones, enable and configure the notification services (see System settings (the Programming tab) and Notification services sections).