Versions Compared

Old Version 1

changes.mady.by.user Gennady Marchenko

Saved on

compared with

New Version 2

changes.mady.by.user Sofya Uyutova

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info
titleNote.

This settings is specified only when the Auto-Uragan, CARMEN-parking, CARMEN-auto, or VIT or AxxonSoft program modules are in use.

...

  1. In the System Settings dialog window, open the Hardware tab.
  2. In the object tree on the left side of the Hardware tab, select the LPR channel, corresponding to the activated Auto-Uragan, CARMEN-parking, or CARMEN-Auto or AxxonSoft program module in the objects tree on the Hardware tab (see Activating the program module, used for identifying the plates section). The settings panel of the selected object will open on the right side of the window.
  3. In the Speed-trap settings drop-down list, select the Speed-trap object representing the speed-trap device directed at the same lane as the LPR channel camera (3).

  4. In the Synchronization time field, enter the time period in milliseconds that it takes the vehicle to drive from the spot of speed detection by the Radar speed-trap to the viewing zone of the LPR channel recognition video camera (4).

    Info
    titleNote.

    Synchronization time is needed to synchronize the operation of the Radar and the LPR channel modules.

  5. Check the Filter events from speed-trap checkbox, if necessary (5). If the checkbox is checked only the first detected speed value is registered, while other values are ignored until the delay expires or until the LP number is recognized.
  6. Click Apply (6).

...